# This file is part of QuTiP: Quantum Toolbox in Python.
#
# Copyright (c) 2011 and later, Paul D. Nation and Robert J. Johansson.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# 1. Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# 3. Neither the name of the QuTiP: Quantum Toolbox in Python nor the names
# of its contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
# PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
###############################################################################
import numpy as np
import warnings
from qutip.qip.circuit_latex import _latex_compile
from qutip.qip.gates import *
from qutip.qip.qubits import qubit_states
__all__ = ['Gate', 'QubitCircuit']
[docs]class Gate(object):
"""
Representation of a quantum gate, with its required parametrs, and target
and control qubits.
"""
def __init__(self, name, targets=None, controls=None, arg_value=None,
arg_label=None):
"""
Creates a gate with specified parameters.
Parameters
----------
name : String
Gate name.
targets : List
Gate targets.
controls : List
Gate controls.
arg_value : Float
Argument value(phi).
arg_label : String
Label for gate representation.
"""
self.name = name
self.targets = None
self.controls = None
if not isinstance(targets, list) and targets is not None:
self.targets = [targets]
else:
self.targets = targets
if not isinstance(controls, list) and controls is not None:
self.controls = [controls]
else:
self.controls = controls
self.arg_value = arg_value
self.arg_label = arg_label
if name in ["SWAP", "ISWAP", "SQRTISWAP", "SQRTSWAP", "BERKELEY",
"SWAPalpha"]:
if len(self.targets) != 2:
raise ValueError("Gate %s requires two targets" % name)
if self.controls is not None:
raise ValueError("Gate %s cannot have a control" % name)
if name in ["CNOT", "CSIGN", "CRX", "CRY", "CRZ"]:
if self.targets is None or len(self.targets) != 1:
raise ValueError("Gate %s requires one target" % name)
if self.controls is None or len(self.controls) != 1:
raise ValueError("Gate %s requires one control" % name)
if name in ["SNOT", "RX", "RY", "RZ", "PHASEGATE"]:
if self.controls is not None:
raise ValueError("Gate %s does not take controls" % name)
if name in ["RX", "RY", "RZ", "CPHASE", "SWAPalpha", "PHASEGATE",
"GLOBALPHASE", "CRX", "CRY", "CRZ"]:
if arg_value is None:
raise ValueError("Gate %s requires an argument value" % name)
self.arg_value = arg_value
self.arg_label = arg_label
def __str__(self):
s = "Gate(%s, targets=%s, controls=%s)" % (self.name,
self.targets,
self.controls)
return s
def __repr__(self):
return str(self)
def _repr_latex_(self):
return str(self)
_gate_name_to_label = {
'RX': r'R_x',
'RY': r'R_y',
'RZ': r'R_z',
'CRX': r'R_x',
'CRY': r'R_y',
'CRZ': r'R_z',
'SQRTNOT': r'\sqrt{\rm NOT}',
'SNOT': r'{\rm H}',
'PHASEGATE': r'{\rm PHASE}',
'CPHASE': r'{\rm R}',
'CNOT': r'{\rm CNOT}',
'CSIGN': r'{\rm Z}',
'BERKELEY': r'{\rm BERKELEY}',
'SWAPalpha': r'{\rm SWAPalpha}',
'SWAP': r'{\rm SWAP}',
'ISWAP': r'{i}{\rm SWAP}',
'SQRTSWAP': r'\sqrt{\rm SWAP}',
'SQRTISWAP': r'\sqrt{{i}\rm SWAP}',
'FREDKIN': r'{\rm FREDKIN}',
'TOFFOLI': r'{\rm TOFFOLI}',
'GLOBALPHASE': r'{\rm Ph}',
}
def _gate_label(name, arg_label):
if name in _gate_name_to_label:
gate_label = _gate_name_to_label[name]
else:
warnings.warn("Unknown gate %s" % name)
gate_label = name
if arg_label:
return r'%s(%s)' % (gate_label, arg_label)
else:
return r'%s' % gate_label
[docs]class QubitCircuit(object):
"""
Representation of a quantum program/algorithm, maintaining a sequence
of gates.
"""
def __init__(self, N, input_states=None, output_states=None,
reverse_states=True):
# number of qubits in the register
self.N = N
self.reverse_states = reverse_states
self.gates = []
self.U_list = []
self.input_states = [None for i in range(N)]
self.output_states = [None for i in range(N)]
[docs] def add_state(self, state, targets=None, state_type="input"):
"""
Add an input or ouput state to the circuit. By default all the input
and output states will be initialized to `None`. A particular state can
be added by specifying the state and the qubit where it has to be added
along with the type as input or output.
Parameters
----------
state: str
The state that has to be added. It can be any string such as `0`,
'+', "A", "Y"
targets: list
A list of qubit positions where the given state has to be added.
state_type: str
One of either "input" or "output". This specifies whether the state
to be added is an input or output.
default: "input"
"""
if state_type == "input":
for i in targets:
self.input_states[i] = state
if state_type == "output":
for i in targets:
self.output_states[i] = state
[docs] def add_gate(self, gate, targets=None, controls=None, arg_value=None,
arg_label=None):
"""
Adds a gate with specified parameters to the circuit.
Parameters
----------
gate: String or `Gate`
Gate name. If gate is an instance of `Gate`, parameters are
unpacked and added.
targets: List
Gate targets.
controls: List
Gate controls.
arg_value: Float
Argument value(phi).
arg_label: String
Label for gate representation.
"""
if isinstance(gate, Gate):
name = gate.name
targets = gate.targets
controls = gate.controls
arg_value = gate.arg_value
arg_label = gate.arg_label
else:
name = gate
self.gates.append(Gate(name, targets=targets, controls=controls,
arg_value=arg_value, arg_label=arg_label))
[docs] def add_1q_gate(self, name, start=0, end=None, qubits=None,
arg_value=None, arg_label=None):
"""
Adds a single qubit gate with specified parameters on a variable
number of qubits in the circuit. By default, it applies the given gate
to all the qubits in the register.
Parameters
----------
name : String
Gate name.
start : Integer
Starting location of qubits.
end : Integer
Last qubit for the gate.
qubits : List
Specific qubits for applying gates.
arg_value : Float
Argument value(phi).
arg_label : String
Label for gate representation.
"""
if name not in ["RX", "RY", "RZ", "SNOT", "SQRTNOT", "PHASEGATE"]:
raise ValueError("%s is not a single qubit gate" % name)
if qubits is not None:
for i in range(len(qubits)):
self.gates.append(Gate(name, targets=qubits[i], controls=None,
arg_value=arg_value,
arg_label=arg_label))
else:
if end is None:
end = self.N - 1
for i in range(start, end):
self.gates.append(Gate(name, targets=i, controls=None,
arg_value=arg_value,
arg_label=arg_label))
[docs] def add_circuit(self, qc, start=0):
"""
Adds a block of a qubit circuit to the main circuit.
Globalphase gates are not added.
Parameters
----------
qc : QubitCircuit
The circuit block to be added to the main circuit.
start : Integer
The qubit on which the first gate is applied.
"""
if self.N - start < qc.N:
raise NotImplementedError("Targets exceed number of qubits.")
for gate in qc.gates:
if gate.name in ["RX", "RY", "RZ", "SNOT", "SQRTNOT", "PHASEGATE"]:
self.add_gate(gate.name, gate.targets[0] + start, None,
gate.arg_value, gate.arg_label)
elif gate.name in ["CPHASE", "CNOT", "CSIGN", "CRX", "CRY", "CRZ"]:
self.add_gate(gate.name, gate.targets[0] + start,
gate.controls[0] + start, gate.arg_value,
gate.arg_label)
elif gate.name in ["BERKELEY", "SWAPalpha", "SWAP", "ISWAP",
"SQRTSWAP", "SQRTISWAP"]:
self.add_gate(gate.name, None,
[gate.controls[0] + start,
gate.controls[1] + start], None, None)
elif gate.name in ["TOFFOLI"]:
self.add_gate(gate.name, gate.targets[0] + start,
[gate.controls[0] + start,
gate.controls[1] + start], None, None)
elif gate.name in ["FREDKIN"]:
self.add_gate(gate.name,
[gate.targets[0] + start,
gate.targets[1] + start],
gate.controls + start, None, None)
[docs] def remove_gate(self, index=None, end=None, name=None, remove="first"):
"""
Removes a gate from a specific index or between two indexes or the
first, last or all instances of a particular gate.
Parameters
----------
index : Integer
Location of gate to be removed.
name : String
Gate name to be removed.
remove : String
If first or all gate are to be removed.
"""
if index is not None and index <= self.N:
if end is not None and end <= self.N:
for i in range(end - index):
self.gates.pop(index + i)
elif end is not None and end > self.N:
raise ValueError("End target exceeds number of gates.")
else:
self.gates.pop(index)
elif name is not None and remove == "first":
for gate in self.gates:
if name == gate.name:
self.gates.remove(gate)
break
elif name is not None and remove == "last":
for i in range(self.N + 1):
if name == self.gates[self.N - i].name:
self.gates.remove(self.gates[self.N - i])
break
elif name is not None and remove == "all":
for j in range(self.N + 1):
if name == self.gates[self.N - j].name:
self.gates.remove(self.gates[self.N - j])
else:
self.gates.pop()
[docs] def reverse_circuit(self):
"""
Reverses an entire circuit of unitary gates.
Returns
----------
qc : QubitCircuit
Returns QubitCircuit of resolved gates for the qubit circuit in the
reverse order.
"""
temp = QubitCircuit(self.N, self.reverse_states)
for gate in reversed(self.gates):
temp.add_gate(gate)
return temp
[docs] def resolve_gates(self, basis=["CNOT", "RX", "RY", "RZ"]):
"""
Unitary matrix calculator for N qubits returning the individual
steps as unitary matrices operating from left to right in the specified
basis.
Parameters
----------
basis : list.
Basis of the resolved circuit.
Returns
-------
qc : QubitCircuit
Returns QubitCircuit of resolved gates for the qubit circuit in the
desired basis.
"""
qc_temp = QubitCircuit(self.N, self.reverse_states)
temp_resolved = []
basis_1q = []
basis_2q = None
basis_1q_valid = ["RX", "RY", "RZ"]
basis_2q_valid = ["CNOT", "CSIGN", "ISWAP", "SQRTSWAP", "SQRTISWAP"]
if isinstance(basis, list):
for gate in basis:
if gate not in (basis_1q_valid + basis_2q_valid):
raise ValueError("%s is not a valid basis gate" % gate)
if gate in basis_2q_valid:
if basis_2q is not None:
raise ValueError("At most one two-qubit gate allowed")
basis_2q = gate
else:
basis_1q.append(gate)
if len(basis_1q) == 1:
raise ValueError("Not sufficient single-qubit gates in basis")
elif len(basis_1q) == 0:
basis_1q = ["RX", "RY", "RZ"]
else:
basis_1q = ["RX", "RY", "RZ"]
if basis in basis_2q_valid:
basis_2q = basis
else:
raise ValueError("%s is not a valid two-qubit basis gate"
% basis)
for gate in self.gates:
if gate.name == "RX":
temp_resolved.append(gate)
elif gate.name == "RY":
temp_resolved.append(gate)
elif gate.name == "RZ":
temp_resolved.append(gate)
elif gate.name == "SQRTNOT":
temp_resolved.append(Gate("GLOBALPHASE", None, None,
arg_value=np.pi / 4,
arg_label=r"\pi/4"))
temp_resolved.append(Gate("RX", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
elif gate.name == "SNOT":
temp_resolved.append(Gate("GLOBALPHASE", None, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RX", gate.targets, None,
arg_value=np.pi, arg_label=r"\pi"))
temp_resolved.append(Gate("RY", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
elif gate.name == "PHASEGATE":
temp_resolved.append(Gate("GLOBALPHASE", None, None,
arg_value=gate.arg_value / 2,
arg_label=gate.arg_label))
temp_resolved.append(Gate("RZ", gate.targets, None,
gate.arg_value, gate.arg_label))
elif gate.name == "CPHASE":
raise NotImplementedError("Cannot be resolved in this basis")
elif gate.name == "CNOT":
temp_resolved.append(gate)
elif gate.name == "CSIGN" and basis_2q is not "CSIGN":
temp_resolved.append(Gate("RY", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RX", gate.targets, None,
arg_value=np.pi, arg_label=r"\pi"))
temp_resolved.append(Gate("CNOT", gate.targets, gate.controls))
temp_resolved.append(Gate("RY", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RX", gate.targets, None,
arg_value=np.pi, arg_label=r"\pi"))
temp_resolved.append(Gate("GLOBALPHASE", None, None,
arg_value=np.pi, arg_label=r"\pi"))
elif gate.name == "BERKELEY":
raise NotImplementedError("Cannot be resolved in this basis")
elif gate.name == "SWAPalpha":
raise NotImplementedError("Cannot be resolved in this basis")
elif gate.name == "SWAP" and basis_2q is not "ISWAP":
temp_resolved.append(Gate("CNOT", gate.targets[0],
gate.targets[1]))
temp_resolved.append(Gate("CNOT", gate.targets[1],
gate.targets[0]))
temp_resolved.append(Gate("CNOT", gate.targets[0],
gate.targets[1]))
elif gate.name == "ISWAP" and basis_2q is not "ISWAP":
temp_resolved.append(Gate("CNOT", gate.targets[0],
gate.targets[1]))
temp_resolved.append(Gate("CNOT", gate.targets[1],
gate.targets[0]))
temp_resolved.append(Gate("CNOT", gate.targets[0],
gate.targets[1]))
temp_resolved.append(Gate("RZ", gate.targets[0], None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RZ", gate.targets[1], None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RY", gate.targets[0], None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RX", gate.targets, None,
arg_value=np.pi, arg_label=r"\pi"))
temp_resolved.append(Gate("CNOT", gate.targets[0],
gate.targets[1]))
temp_resolved.append(Gate("RY", gate.targets[0], None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RX", gate.targets, None,
arg_value=np.pi, arg_label=r"\pi"))
temp_resolved.append(Gate("GLOBALPHASE", None, None,
arg_value=np.pi, arg_label=r"\pi"))
temp_resolved.append(Gate("GLOBALPHASE", None, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
elif gate.name == "SQRTSWAP" and basis_2q not in ["SQRTSWAP",
"ISWAP"]:
raise NotImplementedError("Cannot be resolved in this basis")
elif gate.name == "SQRTISWAP" and basis_2q not in ["SQRTISWAP",
"ISWAP"]:
raise NotImplementedError("Cannot be resolved in this basis")
elif gate.name == "FREDKIN":
temp_resolved.append(Gate("CNOT", gate.targets[0],
gate.targets[1]))
temp_resolved.append(Gate("CNOT", gate.targets[0],
gate.controls))
temp_resolved.append(Gate("RZ", gate.controls, None,
arg_value=np.pi / 8,
arg_label=r"\pi/8"))
temp_resolved.append(Gate("RZ", [gate.targets[0]], None,
arg_value=-np.pi / 8,
arg_label=r"-\pi/8"))
temp_resolved.append(Gate("CNOT", gate.targets[0],
gate.controls))
temp_resolved.append(Gate("GLOBALPHASE", None, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RY", gate.targets[1], None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RY", gate.targets, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
temp_resolved.append(Gate("RZ", gate.targets, None,
arg_value=np.pi, arg_label=r"\pi"))
temp_resolved.append(Gate("RY", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RZ", gate.targets[0], None,
arg_value=np.pi / 8,
arg_label=r"\pi/8"))
temp_resolved.append(Gate("RZ", gate.targets[1], None,
arg_value=np.pi / 8,
arg_label=r"\pi/8"))
temp_resolved.append(Gate("CNOT", gate.targets[1],
gate.controls))
temp_resolved.append(Gate("RZ", gate.targets[1], None,
arg_value=-np.pi / 8,
arg_label=r"-\pi/8"))
temp_resolved.append(Gate("CNOT", gate.targets[1],
gate.targets[0]))
temp_resolved.append(Gate("RZ", gate.targets[1], None,
arg_value=np.pi / 8,
arg_label=r"\pi/8"))
temp_resolved.append(Gate("CNOT", gate.targets[1],
gate.controls))
temp_resolved.append(Gate("RZ", gate.targets[1], None,
arg_value=-np.pi / 8,
arg_label=r"-\pi/8"))
temp_resolved.append(Gate("CNOT", gate.targets[1],
gate.targets[0]))
temp_resolved.append(Gate("GLOBALPHASE", None, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RY", gate.targets[1], None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RY", gate.targets, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
temp_resolved.append(Gate("RZ", gate.targets, None,
arg_value=np.pi, arg_label=r"\pi"))
temp_resolved.append(Gate("RY", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("CNOT", gate.targets[0],
gate.targets[1]))
elif gate.name == "TOFFOLI":
temp_resolved.append(Gate("GLOBALPHASE", None, None,
arg_value=1 * np.pi / 8,
arg_label=r"\pi/8"))
temp_resolved.append(Gate("RZ", gate.controls[1], None,
arg_value=np.pi/2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RZ", gate.controls[0], None,
arg_value=np.pi / 4,
arg_label=r"\pi/4"))
temp_resolved.append(Gate("CNOT", gate.controls[1],
gate.controls[0]))
temp_resolved.append(Gate("RZ", gate.controls[1], None,
arg_value=-np.pi / 4,
arg_label=r"-\pi/4"))
temp_resolved.append(Gate("CNOT", gate.controls[1],
gate.controls[0]))
temp_resolved.append(Gate("GLOBALPHASE", None, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RY", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RX", gate.targets, None,
arg_value=np.pi, arg_label=r"\pi"))
temp_resolved.append(Gate("RZ", gate.controls[1], None,
arg_value=-np.pi / 4,
arg_label=r"-\pi/4"))
temp_resolved.append(Gate("RZ", gate.targets, None,
arg_value=np.pi / 4,
arg_label=r"\pi/4"))
temp_resolved.append(Gate("CNOT", gate.targets,
gate.controls[0]))
temp_resolved.append(Gate("RZ", gate.targets, None,
arg_value=-np.pi / 4,
arg_label=r"-\pi/4"))
temp_resolved.append(Gate("CNOT", gate.targets,
gate.controls[1]))
temp_resolved.append(Gate("RZ", gate.targets, None,
arg_value=np.pi / 4,
arg_label=r"\pi/4"))
temp_resolved.append(Gate("CNOT", gate.targets,
gate.controls[0]))
temp_resolved.append(Gate("RZ", gate.targets, None,
arg_value=-np.pi / 4,
arg_label=r"-\pi/4"))
temp_resolved.append(Gate("CNOT", gate.targets,
gate.controls[1]))
temp_resolved.append(Gate("GLOBALPHASE", None, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RY", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
temp_resolved.append(Gate("RX", gate.targets, None,
arg_value=np.pi, arg_label=r"\pi"))
elif gate.name == "GLOBALPHASE":
temp_resolved.append(Gate(gate.name, gate.targets,
gate.controls,
gate.arg_value, gate.arg_label))
else:
temp_resolved.append(gate)
if basis_2q == "CSIGN":
for gate in temp_resolved:
if gate.name == "CNOT":
qc_temp.gates.append(Gate("RY", gate.targets, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("CSIGN", gate.targets,
gate.controls))
qc_temp.gates.append(Gate("RY", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
else:
qc_temp.gates.append(gate)
elif basis_2q == "ISWAP":
for gate in temp_resolved:
if gate.name == "CNOT":
qc_temp.gates.append(Gate("GLOBALPHASE", None, None,
arg_value=np.pi / 4,
arg_label=r"\pi/4"))
qc_temp.gates.append(Gate("ISWAP", [gate.controls[0],
gate.targets[0]],
None))
qc_temp.gates.append(Gate("RZ", gate.targets, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("RY", gate.controls, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("RZ", gate.controls, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
qc_temp.gates.append(Gate("ISWAP", [gate.controls[0],
gate.targets[0]],
None))
qc_temp.gates.append(Gate("RY", gate.targets, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("RZ", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
elif gate.name == "SWAP":
qc_temp.gates.append(Gate("GLOBALPHASE", None, None,
arg_value=np.pi / 4,
arg_label=r"\pi/4"))
qc_temp.gates.append(Gate("ISWAP", gate.targets, None))
qc_temp.gates.append(Gate("RX", gate.targets[0], None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("ISWAP", gate.targets, None))
qc_temp.gates.append(Gate("RX", gate.targets[1], None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("ISWAP", [gate.targets[1],
gate.targets[0]],
None))
qc_temp.gates.append(Gate("RX", gate.targets[0], None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
else:
qc_temp.gates.append(gate)
elif basis_2q == "SQRTSWAP":
for gate in temp_resolved:
if gate.name == "CNOT":
qc_temp.gates.append(Gate("RY", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
qc_temp.gates.append(Gate("SQRTSWAP", [gate.controls[0],
gate.targets[0]],
None))
qc_temp.gates.append(Gate("RZ", gate.controls, None,
arg_value=np.pi,
arg_label=r"\pi"))
qc_temp.gates.append(Gate("SQRTSWAP", [gate.controls[0],
gate.targets[0]],
None))
qc_temp.gates.append(Gate("RZ", gate.targets, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("RY", gate.targets, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("RZ", gate.controls, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
else:
qc_temp.gates.append(gate)
elif basis_2q == "SQRTISWAP":
for gate in temp_resolved:
if gate.name == "CNOT":
qc_temp.gates.append(Gate("RY", gate.controls, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("RX", gate.controls, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
qc_temp.gates.append(Gate("RX", gate.targets, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("SQRTISWAP", [gate.controls[0],
gate.targets[0]],
None))
qc_temp.gates.append(Gate("RX", gate.controls, None,
arg_value=np.pi,
arg_label=r"\pi"))
qc_temp.gates.append(Gate("SQRTISWAP", [gate.controls[0],
gate.targets[0]],
None))
qc_temp.gates.append(Gate("RY", gate.controls, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
qc_temp.gates.append(Gate("GLOBALPHASE", None, None,
arg_value=np.pi / 4,
arg_label=r"\pi/4"))
qc_temp.gates.append(Gate("RZ", gate.controls, None,
arg_value=np.pi,
arg_label=r"\pi"))
qc_temp.gates.append(Gate("GLOBALPHASE", None, None,
arg_value=3 * np.pi / 2,
arg_label=r"3\pi/2"))
else:
qc_temp.gates.append(gate)
else:
qc_temp.gates = temp_resolved
if len(basis_1q) == 2:
temp_resolved = qc_temp.gates
qc_temp.gates = []
for gate in temp_resolved:
if gate.name == "RX" and "RX" not in basis_1q:
qc_temp.gates.append(Gate("RY", gate.targets, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("RZ", gate.targets, None,
gate.arg_value, gate.arg_label))
qc_temp.gates.append(Gate("RY", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
elif gate.name == "RY" and "RY" not in basis_1q:
qc_temp.gates.append(Gate("RZ", gate.targets, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("RX", gate.targets, None,
gate.arg_value, gate.arg_label))
qc_temp.gates.append(Gate("RZ", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
elif gate.name == "RZ" and "RZ" not in basis_1q:
qc_temp.gates.append(Gate("RX", gate.targets, None,
arg_value=-np.pi / 2,
arg_label=r"-\pi/2"))
qc_temp.gates.append(Gate("RY", gate.targets, None,
gate.arg_value, gate.arg_label))
qc_temp.gates.append(Gate("RX", gate.targets, None,
arg_value=np.pi / 2,
arg_label=r"\pi/2"))
else:
qc_temp.gates.append(gate)
return qc_temp
[docs] def adjacent_gates(self):
"""
Method to resolve two qubit gates with non-adjacent control/s or
target/s in terms of gates with adjacent interactions.
Returns
----------
qc : QubitCircuit
Returns QubitCircuit of the gates for the qubit circuit with the
resolved non-adjacent gates.
"""
temp = QubitCircuit(self.N, self.reverse_states)
swap_gates = ["SWAP", "ISWAP", "SQRTISWAP", "SQRTSWAP", "BERKELEY",
"SWAPalpha"]
for gate in self.gates:
if gate.name == "CNOT" or gate.name == "CSIGN":
start = min([gate.targets[0], gate.controls[0]])
end = max([gate.targets[0], gate.controls[0]])
i = start
while i < end:
if start + end - i - i == 1 and (end - start + 1) % 2 == 0:
# Apply required gate if control, target are adjacent
# to each other, provided |control-target| is even.
if end == gate.controls[0]:
temp.gates.append(Gate(gate.name, targets=[i],
controls=[i + 1]))
else:
temp.gates.append(Gate(gate.name, targets=[i + 1],
controls=[i]))
elif (start + end - i - i == 2 and
(end - start + 1) % 2 == 1):
# Apply a swap between i and its adjacent gate, then
# the required gate if and then another swap if control
# and target have one qubit between them, provided
# |control-target| is odd.
temp.gates.append(Gate("SWAP", targets=[i, i + 1]))
if end == gate.controls[0]:
temp.gates.append(Gate(gate.name, targets=[i + 1],
controls=[i + 2]))
else:
temp.gates.append(Gate(gate.name, targets=[i + 2],
controls=[i + 1]))
temp.gates.append(Gate("SWAP", targets=[i, i + 1]))
i += 1
else:
# Swap the target/s and/or control with their adjacent
# qubit to bring them closer.
temp.gates.append(Gate("SWAP", targets=[i, i + 1]))
temp.gates.append(Gate("SWAP",
targets=[start + end - i - 1,
start + end - i]))
i += 1
elif gate.name in swap_gates:
start = min([gate.targets[0], gate.targets[1]])
end = max([gate.targets[0], gate.targets[1]])
i = start
while i < end:
if start + end - i - i == 1 and (end - start + 1) % 2 == 0:
temp.gates.append(Gate(gate.name, targets=[i, i + 1]))
elif ((start + end - i - i) == 2 and
(end - start + 1) % 2 == 1):
temp.gates.append(Gate("SWAP", targets=[i, i + 1]))
temp.gates.append(
Gate(gate.name, targets=[i + 1, i + 2]))
temp.gates.append(Gate("SWAP", targets=[i, i + 1]))
i += 1
else:
temp.gates.append(Gate("SWAP", targets=[i, i + 1]))
temp.gates.append(Gate("SWAP",
targets=[start + end - i - 1,
start + end - i]))
i += 1
else:
temp.gates.append(gate)
return temp
[docs] def propagators(self):
"""
Propagator matrix calculator for N qubits returning the individual
steps as unitary matrices operating from left to right.
Returns
-------
U_list : list
Returns list of unitary matrices for the qubit circuit.
"""
self.U_list = []
for gate in self.gates:
if gate.name == "RX":
self.U_list.append(rx(gate.arg_value, self.N, gate.targets[0]))
elif gate.name == "RY":
self.U_list.append(ry(gate.arg_value, self.N, gate.targets[0]))
elif gate.name == "RZ":
self.U_list.append(rz(gate.arg_value, self.N, gate.targets[0]))
elif gate.name == "SQRTNOT":
self.U_list.append(sqrtnot(self.N, gate.targets[0]))
elif gate.name == "SNOT":
self.U_list.append(snot(self.N, gate.targets[0]))
elif gate.name == "PHASEGATE":
self.U_list.append(phasegate(gate.arg_value, self.N,
gate.targets[0]))
if gate.name == "CRX":
self.U_list.append(controlled_gate(rx(gate.arg_value),
N=self.N,
control=gate.controls[0],
target=gate.targets[0]))
elif gate.name == "CRY":
self.U_list.append(controlled_gate(ry(gate.arg_value),
N=self.N,
control=gate.controls[0],
target=gate.targets[0]))
elif gate.name == "CRZ":
self.U_list.append(controlled_gate(rz(gate.arg_value),
N=self.N,
control=gate.controls[0],
target=gate.targets[0]))
elif gate.name == "CPHASE":
self.U_list.append(cphase(gate.arg_value, self.N,
gate.controls[0], gate.targets[0]))
elif gate.name == "CNOT":
self.U_list.append(cnot(self.N,
gate.controls[0], gate.targets[0]))
elif gate.name == "CSIGN":
self.U_list.append(csign(self.N,
gate.controls[0], gate.targets[0]))
elif gate.name == "BERKELEY":
self.U_list.append(berkeley(self.N, gate.targets))
elif gate.name == "SWAPalpha":
self.U_list.append(swapalpha(gate.arg_value, self.N,
gate.targets))
elif gate.name == "SWAP":
self.U_list.append(swap(self.N, gate.targets))
elif gate.name == "ISWAP":
self.U_list.append(iswap(self.N, gate.targets))
elif gate.name == "SQRTSWAP":
self.U_list.append(sqrtswap(self.N, gate.targets))
elif gate.name == "SQRTISWAP":
self.U_list.append(sqrtiswap(self.N, gate.targets))
elif gate.name == "FREDKIN":
self.U_list.append(fredkin(self.N, gate.controls[0],
gate.targets))
elif gate.name == "TOFFOLI":
self.U_list.append(toffoli(self.N, gate.controls,
gate.targets[0]))
elif gate.name == "GLOBALPHASE":
self.U_list.append(globalphase(gate.arg_value, self.N))
return self.U_list
def latex_code(self):
rows = []
gates = self.gates
for gate in gates:
col = []
for n in range(self.N):
if gate.targets and n in gate.targets:
if len(gate.targets) > 1:
if ((self.reverse_states and n == max(gate.targets)) or
(not self.reverse_states
and n == min(gate.targets))):
col.append(r" \multigate{%d}{%s} " %
(len(gate.targets) - 1,
_gate_label(gate.name,
gate.arg_label)))
else:
col.append(r" \ghost{%s} " %
(_gate_label(gate.name,
gate.arg_label)))
elif gate.name == "CNOT":
col.append(r" \targ ")
elif gate.name == "SWAP":
col.append(r" \qswap ")
else:
col.append(r" \gate{%s} " %
_gate_label(gate.name, gate.arg_label))
elif gate.controls and n in gate.controls:
m = (gate.targets[0] - n) * (-1 if self.reverse_states
else 1)
if gate.name == "SWAP":
col.append(r" \qswap \ctrl{%d} " % m)
else:
col.append(r" \ctrl{%d} " % m)
elif (not gate.controls and not gate.targets):
# global gate
if ((self.reverse_states and n == self.N - 1)
or (not self.reverse_states and n == 0)):
col.append(r" \multigate{%d}{%s} " %
(self.N - 1,
_gate_label(gate.name, gate.arg_label)))
else:
col.append(r" \ghost{%s} " %
(_gate_label(gate.name, gate.arg_label)))
else:
col.append(r" \qw ")
col.append(r" \qw ")
rows.append(col)
input_states = ["\lstick{\ket{" + x + "}}" if x is not None
else "" for x in self.input_states]
code = ""
n_iter = (reversed(range(self.N)) if self.reverse_states
else range(self.N))
for n in n_iter:
code += r" & %s" % input_states[n]
for m in range(len(gates)):
code += r" & %s" % rows[m][n]
code += r" & \qw \\ " + "\n"
return code
def _repr_png_(self):
return _latex_compile(self.latex_code(), format="png")
def _repr_svg_(self):
return _latex_compile(self.latex_code(), format="svg")
@property
def png(self):
from IPython.display import Image
return Image(self._repr_png_(), embed=True)
@property
def svg(self):
from IPython.display import SVG
return SVG(self._repr_svg_())
def qasm(self):
code = "# qasm code generated by QuTiP\n\n"
for n in range(self.N):
code += "\tqubit\tq%d\n" % n
code += "\n"
for gate in self.gates:
code += "\t%s\t" % gate.name
qtargets = ["q%d" %
t for t in gate.targets] if gate.targets else []
qcontrols = (["q%d" % c for c in gate.controls] if gate.controls
else [])
code += ",".join(qtargets + qcontrols)
code += "\n"
return code