Source code for qutip.qip.circuit

# This file is part of QuTiP: Quantum Toolbox in Python.
#
#    Copyright (c) 2011 and later, Paul D. Nation and Robert J. Johansson.
#    All rights reserved.
#
#    Redistribution and use in source and binary forms, with or without
#    modification, are permitted provided that the following conditions are
#    met:
#
#    1. Redistributions of source code must retain the above copyright notice,
#       this list of conditions and the following disclaimer.
#
#    2. Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#
#    3. Neither the name of the QuTiP: Quantum Toolbox in Python nor the names
#       of its contributors may be used to endorse or promote products derived
#       from this software without specific prior written permission.
#
#    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
#    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
#    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
#    PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
#    HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
#    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
#    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
#    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
#    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
###############################################################################

from collections.abc import Iterable
import warnings
import inspect

import numpy as np

import numpy as np

from qutip.qip.circuit_latex import _latex_compile
from qutip.qip.gates import *
from qutip.qip.qubits import qubit_states

__all__ = ['Gate', 'QubitCircuit']


[docs]class Gate(object): """ Representation of a quantum gate, with its required parametrs, and target and control qubits. Parameters ---------- name : string Gate name. targets : list or int Gate targets. controls : list or int Gate controls. arg_value : float Argument value(phi). arg_label : string Label for gate representation. """ def __init__(self, name, targets=None, controls=None, arg_value=None, arg_label=None): """ Create a gate with specified parameters. """ self.name = name self.targets = None self.controls = None if not isinstance(targets, Iterable) and targets is not None: self.targets = [targets] else: self.targets = targets if not isinstance(controls, Iterable) and controls is not None: self.controls = [controls] else: self.controls = controls for ind_list in [self.targets, self.controls]: if isinstance(ind_list, Iterable): all_integer = all( [isinstance(ind, np.int) for ind in ind_list]) if not all_integer: raise ValueError("Index of a qubit must be an integer") if name in ["SWAP", "ISWAP", "SQRTISWAP", "SQRTSWAP", "BERKELEY", "SWAPalpha"]: if (self.targets is None) or (len(self.targets) != 2): raise ValueError("Gate %s requires two targets" % name) if self.controls is not None: raise ValueError("Gate %s cannot have a control" % name) elif name in ["CNOT", "CSIGN", "CRX", "CRY", "CRZ"]: if self.targets is None or len(self.targets) != 1: raise ValueError("Gate %s requires one target" % name) if self.controls is None or len(self.controls) != 1: raise ValueError("Gate %s requires one control" % name) elif name in ["SNOT", "RX", "RY", "RZ", "PHASEGATE"]: if self.controls is not None: raise ValueError("Gate %s does not take controls" % name) elif name in ["RX", "RY", "RZ", "CPHASE", "SWAPalpha", "PHASEGATE", "GLOBALPHASE", "CRX", "CRY", "CRZ"]: if arg_value is None: raise ValueError("Gate %s requires an argument value" % name) self.arg_value = arg_value self.arg_label = arg_label def __str__(self): s = "Gate(%s, targets=%s, controls=%s)" % (self.name, self.targets, self.controls) return s def __repr__(self): return str(self) def _repr_latex_(self): return str(self)
_gate_name_to_label = { 'RX': r'R_x', 'RY': r'R_y', 'RZ': r'R_z', 'CRX': r'R_x', 'CRY': r'R_y', 'CRZ': r'R_z', 'SQRTNOT': r'\sqrt{\rm NOT}', 'SNOT': r'{\rm H}', 'PHASEGATE': r'{\rm PHASE}', 'CPHASE': r'{\rm R}', 'CNOT': r'{\rm CNOT}', 'CSIGN': r'{\rm Z}', 'BERKELEY': r'{\rm BERKELEY}', 'SWAPalpha': r'{\rm SWAPalpha}', 'SWAP': r'{\rm SWAP}', 'ISWAP': r'{i}{\rm SWAP}', 'SQRTSWAP': r'\sqrt{\rm SWAP}', 'SQRTISWAP': r'\sqrt{{i}\rm SWAP}', 'FREDKIN': r'{\rm FREDKIN}', 'TOFFOLI': r'{\rm TOFFOLI}', 'GLOBALPHASE': r'{\rm Ph}', } def _gate_label(name, arg_label): if name in _gate_name_to_label: gate_label = _gate_name_to_label[name] else: warnings.warn("Unknown gate %s" % name) gate_label = name if arg_label: return r'%s(%s)' % (gate_label, arg_label) else: return r'%s' % gate_label
[docs]class QubitCircuit(object): """ Representation of a quantum program/algorithm, maintaining a sequence of gates. Parameters ---------- N : int Number of qubits in the system. user_gates : dict Define a dictionary of the custom gates. See examples for detail. input_states : list A list of string such as `0`,'+', "A", "Y". Only used for latex. Examples -------- >>> def user_gate(): ... mat = np.array([[1., 0], ... [0., 1.j]]) ... return Qobj(mat, dims=[[2], [2]]) >>> qc.QubitCircuit(2, user_gates={"T":user_gate}) >>> qc.add_gate("T", targets=[0]) """ def __init__(self, N, input_states=None, output_states=None, reverse_states=True, user_gates=None): # number of qubits in the register self.N = N self.reverse_states = reverse_states self.gates = [] self.U_list = [] self.input_states = [None for i in range(N)] self.output_states = [None for i in range(N)] if user_gates is None: self.user_gates = {} else: if isinstance(user_gates, dict): self.user_gates = user_gates else: raise ValueError( "`user_gate` takes a python dictionary of the form" "{{str: gate_function}}, not {}".format(user_gates))
[docs] def add_state(self, state, targets=None, state_type="input"): """ Add an input or ouput state to the circuit. By default all the input and output states will be initialized to `None`. A particular state can be added by specifying the state and the qubit where it has to be added along with the type as input or output. Parameters ---------- state: str The state that has to be added. It can be any string such as `0`, '+', "A", "Y" targets: list A list of qubit positions where the given state has to be added. state_type: str One of either "input" or "output". This specifies whether the state to be added is an input or output. default: "input" """ if state_type == "input": for i in targets: self.input_states[i] = state if state_type == "output": for i in targets: self.output_states[i] = state
[docs] def add_gate(self, gate, targets=None, controls=None, arg_value=None, arg_label=None, index=None): """ Adds a gate with specified parameters to the circuit. Parameters ---------- gate: string or `Gate` Gate name. If gate is an instance of `Gate`, parameters are unpacked and added. targets: list Gate targets. controls: list Gate controls. arg_value: float Argument value(phi). arg_label: string Label for gate representation. index : list Positions to add the gate. """ if isinstance(gate, Gate): name = gate.name targets = gate.targets controls = gate.controls arg_value = gate.arg_value arg_label = gate.arg_label else: name = gate if index is None: self.gates.append(Gate(name, targets=targets, controls=controls, arg_value=arg_value, arg_label=arg_label)) else: for position in index: self.gates.insert(position, Gate(name, targets=targets, controls=controls, arg_value=arg_value, arg_label=arg_label))
[docs] def add_1q_gate(self, name, start=0, end=None, qubits=None, arg_value=None, arg_label=None): """ Adds a single qubit gate with specified parameters on a variable number of qubits in the circuit. By default, it applies the given gate to all the qubits in the register. Parameters ---------- name : string Gate name. start : int Starting location of qubits. end : int Last qubit for the gate. qubits : list Specific qubits for applying gates. arg_value : float Argument value(phi). arg_label : string Label for gate representation. """ if name not in ["RX", "RY", "RZ", "SNOT", "SQRTNOT", "PHASEGATE"]: raise ValueError("%s is not a single qubit gate" % name) if qubits is not None: for i in range(len(qubits)): self.gates.append(Gate(name, targets=qubits[i], controls=None, arg_value=arg_value, arg_label=arg_label)) else: if end is None: end = self.N - 1 for i in range(start, end): self.gates.append(Gate(name, targets=i, controls=None, arg_value=arg_value, arg_label=arg_label))
[docs] def add_circuit(self, qc, start=0): """ Adds a block of a qubit circuit to the main circuit. Globalphase gates are not added. Parameters ---------- qc : QubitCircuit The circuit block to be added to the main circuit. start : int The qubit on which the first gate is applied. """ if self.N - start < qc.N: raise NotImplementedError("Targets exceed number of qubits.") for gate in qc.gates: if gate.name in ["RX", "RY", "RZ", "SNOT", "SQRTNOT", "PHASEGATE"]: self.add_gate(gate.name, gate.targets[0] + start, None, gate.arg_value, gate.arg_label) elif gate.name in ["CPHASE", "CNOT", "CSIGN", "CRX", "CRY", "CRZ"]: self.add_gate(gate.name, gate.targets[0] + start, gate.controls[0] + start, gate.arg_value, gate.arg_label) elif gate.name in ["BERKELEY", "SWAPalpha", "SWAP", "ISWAP", "SQRTSWAP", "SQRTISWAP"]: self.add_gate(gate.name, None, [gate.controls[0] + start, gate.controls[1] + start], None, None) elif gate.name in ["TOFFOLI"]: self.add_gate(gate.name, gate.targets[0] + start, [gate.controls[0] + start, gate.controls[1] + start], None, None) elif gate.name in ["FREDKIN"]: self.add_gate(gate.name, [gate.targets[0] + start, gate.targets[1] + start], gate.controls + start, None, None) elif gate.name in self.user_gates: self.add_gate( gate.name, targets=gate.targets, arg_value=gate.arg_value)
[docs] def remove_gate(self, index=None, end=None, name=None, remove="first"): """ Remove a gate from a specific index or between two indexes or the first, last or all instances of a particular gate. Parameters ---------- index : int Location of gate to be removed. name : string Gate name to be removed. remove : string If first or all gate are to be removed. """ if index is not None and index <= self.N: if end is not None and end <= self.N: for i in range(end - index): self.gates.pop(index + i) elif end is not None and end > self.N: raise ValueError("End target exceeds number of gates.") else: self.gates.pop(index) elif name is not None and remove == "first": for gate in self.gates: if name == gate.name: self.gates.remove(gate) break elif name is not None and remove == "last": for i in range(self.N + 1): if name == self.gates[self.N - i].name: self.gates.remove(self.gates[self.N - i]) break elif name is not None and remove == "all": for j in range(self.N + 1): if name == self.gates[self.N - j].name: self.gates.remove(self.gates[self.N - j]) else: self.gates.pop()
[docs] def reverse_circuit(self): """ Reverse an entire circuit of unitary gates. Returns ---------- qc : QubitCircuit Return QubitCircuit of resolved gates for the qubit circuit in the reverse order. """ temp = QubitCircuit(self.N, self.reverse_states) for gate in reversed(self.gates): temp.add_gate(gate) return temp
[docs] def resolve_gates(self, basis=["CNOT", "RX", "RY", "RZ"]): """ Unitary matrix calculator for N qubits returning the individual steps as unitary matrices operating from left to right in the specified basis. Parameters ---------- basis : list. Basis of the resolved circuit. Returns ------- qc : QubitCircuit Return QubitCircuit of resolved gates for the qubit circuit in the desired basis. """ qc_temp = QubitCircuit(self.N, self.reverse_states) temp_resolved = [] basis_1q_valid = ["RX", "RY", "RZ"] basis_2q_valid = ["CNOT", "CSIGN", "ISWAP", "SQRTSWAP", "SQRTISWAP"] if isinstance(basis, list): basis_1q = [] basis_2q = [] for gate in basis: if gate in basis_2q_valid: basis_2q.append(gate) elif gate in basis_1q_valid: basis_1q.append(gate) else: raise NotImplementedError( "%s is not a valid basis gate" % gate) if len(basis_1q) == 1: raise ValueError("Not sufficient single-qubit gates in basis") elif len(basis_1q) == 0: basis_1q = ["RX", "RY", "RZ"] else: # only one 2q gate is given as basis basis_1q = ["RX", "RY", "RZ"] if basis in basis_2q_valid: basis_2q = [basis] else: raise ValueError("%s is not a valid two-qubit basis gate" % basis) for gate in self.gates: if gate.name == "RX": temp_resolved.append(gate) elif gate.name == "RY": temp_resolved.append(gate) elif gate.name == "RZ": temp_resolved.append(gate) elif gate.name == "SQRTNOT": temp_resolved.append(Gate("GLOBALPHASE", None, None, arg_value=np.pi / 4, arg_label=r"\pi/4")) temp_resolved.append(Gate("RX", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) elif gate.name == "SNOT": temp_resolved.append(Gate("GLOBALPHASE", None, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RX", gate.targets, None, arg_value=np.pi, arg_label=r"\pi")) temp_resolved.append(Gate("RY", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) elif gate.name == "PHASEGATE": temp_resolved.append(Gate("GLOBALPHASE", None, None, arg_value=gate.arg_value / 2, arg_label=gate.arg_label)) temp_resolved.append(Gate("RZ", gate.targets, None, gate.arg_value, gate.arg_label)) elif gate.name in basis_2q: # ignore all gate in 2q basis temp_resolved.append(gate) elif gate.name == "CPHASE": raise NotImplementedError("Cannot be resolved in this basis") elif gate.name == "CNOT": temp_resolved.append(gate) elif gate.name == "CSIGN": temp_resolved.append(Gate("RY", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RX", gate.targets, None, arg_value=np.pi, arg_label=r"\pi")) temp_resolved.append(Gate("CNOT", gate.targets, gate.controls)) temp_resolved.append(Gate("RY", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RX", gate.targets, None, arg_value=np.pi, arg_label=r"\pi")) temp_resolved.append(Gate("GLOBALPHASE", None, None, arg_value=np.pi, arg_label=r"\pi")) elif gate.name == "BERKELEY": raise NotImplementedError("Cannot be resolved in this basis") elif gate.name == "SWAPalpha": raise NotImplementedError("Cannot be resolved in this basis") elif gate.name == "SWAP": if "ISWAP" in basis_2q: # dealed with separately temp_resolved.append(gate) else: temp_resolved.append( Gate("CNOT", gate.targets[0], gate.targets[1])) temp_resolved.append( Gate("CNOT", gate.targets[1], gate.targets[0])) temp_resolved.append( Gate("CNOT", gate.targets[0], gate.targets[1])) elif gate.name == "ISWAP": temp_resolved.append(Gate("CNOT", gate.targets[0], gate.targets[1])) temp_resolved.append(Gate("CNOT", gate.targets[1], gate.targets[0])) temp_resolved.append(Gate("CNOT", gate.targets[0], gate.targets[1])) temp_resolved.append(Gate("RZ", gate.targets[0], None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RZ", gate.targets[1], None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RY", gate.targets[0], None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RX", gate.targets, None, arg_value=np.pi, arg_label=r"\pi")) temp_resolved.append(Gate("CNOT", gate.targets[0], gate.targets[1])) temp_resolved.append(Gate("RY", gate.targets[0], None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RX", gate.targets, None, arg_value=np.pi, arg_label=r"\pi")) temp_resolved.append(Gate("GLOBALPHASE", None, None, arg_value=np.pi, arg_label=r"\pi")) temp_resolved.append(Gate("GLOBALPHASE", None, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) elif gate.name == "SQRTSWAP": raise NotImplementedError("Cannot be resolved in this basis") elif gate.name == "SQRTISWAP": raise NotImplementedError("Cannot be resolved in this basis") elif gate.name == "FREDKIN": temp_resolved.append(Gate("CNOT", gate.targets[0], gate.targets[1])) temp_resolved.append(Gate("CNOT", gate.targets[0], gate.controls)) temp_resolved.append(Gate("RZ", gate.controls, None, arg_value=np.pi / 8, arg_label=r"\pi/8")) temp_resolved.append(Gate("RZ", [gate.targets[0]], None, arg_value=-np.pi / 8, arg_label=r"-\pi/8")) temp_resolved.append(Gate("CNOT", gate.targets[0], gate.controls)) temp_resolved.append(Gate("GLOBALPHASE", None, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RY", gate.targets[1], None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RY", gate.targets, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) temp_resolved.append(Gate("RZ", gate.targets, None, arg_value=np.pi, arg_label=r"\pi")) temp_resolved.append(Gate("RY", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RZ", gate.targets[0], None, arg_value=np.pi / 8, arg_label=r"\pi/8")) temp_resolved.append(Gate("RZ", gate.targets[1], None, arg_value=np.pi / 8, arg_label=r"\pi/8")) temp_resolved.append(Gate("CNOT", gate.targets[1], gate.controls)) temp_resolved.append(Gate("RZ", gate.targets[1], None, arg_value=-np.pi / 8, arg_label=r"-\pi/8")) temp_resolved.append(Gate("CNOT", gate.targets[1], gate.targets[0])) temp_resolved.append(Gate("RZ", gate.targets[1], None, arg_value=np.pi / 8, arg_label=r"\pi/8")) temp_resolved.append(Gate("CNOT", gate.targets[1], gate.controls)) temp_resolved.append(Gate("RZ", gate.targets[1], None, arg_value=-np.pi / 8, arg_label=r"-\pi/8")) temp_resolved.append(Gate("CNOT", gate.targets[1], gate.targets[0])) temp_resolved.append(Gate("GLOBALPHASE", None, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RY", gate.targets[1], None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RY", gate.targets, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) temp_resolved.append(Gate("RZ", gate.targets, None, arg_value=np.pi, arg_label=r"\pi")) temp_resolved.append(Gate("RY", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("CNOT", gate.targets[0], gate.targets[1])) elif gate.name == "TOFFOLI": temp_resolved.append(Gate("GLOBALPHASE", None, None, arg_value=1 * np.pi / 8, arg_label=r"\pi/8")) temp_resolved.append(Gate("RZ", gate.controls[1], None, arg_value=np.pi/2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RZ", gate.controls[0], None, arg_value=np.pi / 4, arg_label=r"\pi/4")) temp_resolved.append(Gate("CNOT", gate.controls[1], gate.controls[0])) temp_resolved.append(Gate("RZ", gate.controls[1], None, arg_value=-np.pi / 4, arg_label=r"-\pi/4")) temp_resolved.append(Gate("CNOT", gate.controls[1], gate.controls[0])) temp_resolved.append(Gate("GLOBALPHASE", None, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RY", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RX", gate.targets, None, arg_value=np.pi, arg_label=r"\pi")) temp_resolved.append(Gate("RZ", gate.controls[1], None, arg_value=-np.pi / 4, arg_label=r"-\pi/4")) temp_resolved.append(Gate("RZ", gate.targets, None, arg_value=np.pi / 4, arg_label=r"\pi/4")) temp_resolved.append(Gate("CNOT", gate.targets, gate.controls[0])) temp_resolved.append(Gate("RZ", gate.targets, None, arg_value=-np.pi / 4, arg_label=r"-\pi/4")) temp_resolved.append(Gate("CNOT", gate.targets, gate.controls[1])) temp_resolved.append(Gate("RZ", gate.targets, None, arg_value=np.pi / 4, arg_label=r"\pi/4")) temp_resolved.append(Gate("CNOT", gate.targets, gate.controls[0])) temp_resolved.append(Gate("RZ", gate.targets, None, arg_value=-np.pi / 4, arg_label=r"-\pi/4")) temp_resolved.append(Gate("CNOT", gate.targets, gate.controls[1])) temp_resolved.append(Gate("GLOBALPHASE", None, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RY", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) temp_resolved.append(Gate("RX", gate.targets, None, arg_value=np.pi, arg_label=r"\pi")) elif gate.name == "GLOBALPHASE": temp_resolved.append(Gate(gate.name, gate.targets, gate.controls, gate.arg_value, gate.arg_label)) else: raise NotImplementedError( "Gate {} " "cannot be resolved.".format(gate.name)) if "CSIGN" in basis_2q: for gate in temp_resolved: if gate.name == "CNOT": qc_temp.gates.append(Gate("RY", gate.targets, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("CSIGN", gate.targets, gate.controls)) qc_temp.gates.append(Gate("RY", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) else: qc_temp.gates.append(gate) elif "ISWAP" in basis_2q: for gate in temp_resolved: if gate.name == "CNOT": qc_temp.gates.append(Gate("GLOBALPHASE", None, None, arg_value=np.pi / 4, arg_label=r"\pi/4")) qc_temp.gates.append(Gate("ISWAP", [gate.controls[0], gate.targets[0]], None)) qc_temp.gates.append(Gate("RZ", gate.targets, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("RY", gate.controls, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("RZ", gate.controls, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) qc_temp.gates.append(Gate("ISWAP", [gate.controls[0], gate.targets[0]], None)) qc_temp.gates.append(Gate("RY", gate.targets, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("RZ", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) elif gate.name == "SWAP": qc_temp.gates.append(Gate("GLOBALPHASE", None, None, arg_value=np.pi / 4, arg_label=r"\pi/4")) qc_temp.gates.append(Gate("ISWAP", gate.targets, None)) qc_temp.gates.append(Gate("RX", gate.targets[0], None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("ISWAP", gate.targets, None)) qc_temp.gates.append(Gate("RX", gate.targets[1], None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("ISWAP", [gate.targets[1], gate.targets[0]], None)) qc_temp.gates.append(Gate("RX", gate.targets[0], None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) else: qc_temp.gates.append(gate) elif "SQRTSWAP" in basis_2q: for gate in temp_resolved: if gate.name == "CNOT": qc_temp.gates.append(Gate("RY", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) qc_temp.gates.append(Gate("SQRTSWAP", [gate.controls[0], gate.targets[0]], None)) qc_temp.gates.append(Gate("RZ", gate.controls, None, arg_value=np.pi, arg_label=r"\pi")) qc_temp.gates.append(Gate("SQRTSWAP", [gate.controls[0], gate.targets[0]], None)) qc_temp.gates.append(Gate("RZ", gate.targets, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("RY", gate.targets, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("RZ", gate.controls, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) else: qc_temp.gates.append(gate) elif "SQRTISWAP" in basis_2q: for gate in temp_resolved: if gate.name == "CNOT": qc_temp.gates.append(Gate("RY", gate.controls, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("RX", gate.controls, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) qc_temp.gates.append(Gate("RX", gate.targets, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("SQRTISWAP", [gate.controls[0], gate.targets[0]], None)) qc_temp.gates.append(Gate("RX", gate.controls, None, arg_value=np.pi, arg_label=r"\pi")) qc_temp.gates.append(Gate("SQRTISWAP", [gate.controls[0], gate.targets[0]], None)) qc_temp.gates.append(Gate("RY", gate.controls, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) qc_temp.gates.append(Gate("GLOBALPHASE", None, None, arg_value=np.pi / 4, arg_label=r"\pi/4")) qc_temp.gates.append(Gate("RZ", gate.controls, None, arg_value=np.pi, arg_label=r"\pi")) qc_temp.gates.append(Gate("GLOBALPHASE", None, None, arg_value=3 * np.pi / 2, arg_label=r"3\pi/2")) else: qc_temp.gates.append(gate) else: qc_temp.gates = temp_resolved if len(basis_1q) == 2: temp_resolved = qc_temp.gates qc_temp.gates = [] for gate in temp_resolved: if gate.name == "RX" and "RX" not in basis_1q: qc_temp.gates.append(Gate("RY", gate.targets, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("RZ", gate.targets, None, gate.arg_value, gate.arg_label)) qc_temp.gates.append(Gate("RY", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) elif gate.name == "RY" and "RY" not in basis_1q: qc_temp.gates.append(Gate("RZ", gate.targets, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("RX", gate.targets, None, gate.arg_value, gate.arg_label)) qc_temp.gates.append(Gate("RZ", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) elif gate.name == "RZ" and "RZ" not in basis_1q: qc_temp.gates.append(Gate("RX", gate.targets, None, arg_value=-np.pi / 2, arg_label=r"-\pi/2")) qc_temp.gates.append(Gate("RY", gate.targets, None, gate.arg_value, gate.arg_label)) qc_temp.gates.append(Gate("RX", gate.targets, None, arg_value=np.pi / 2, arg_label=r"\pi/2")) else: qc_temp.gates.append(gate) return qc_temp
[docs] def adjacent_gates(self): """ Method to resolve two qubit gates with non-adjacent control/s or target/s in terms of gates with adjacent interactions. Returns ------- qc : QubitCircuit Return QubitCircuit of the gates for the qubit circuit with the resolved non-adjacent gates. """ temp = QubitCircuit(self.N, reverse_states=self.reverse_states) swap_gates = ["SWAP", "ISWAP", "SQRTISWAP", "SQRTSWAP", "BERKELEY", "SWAPalpha"] for gate in self.gates: if gate.name == "CNOT" or gate.name == "CSIGN": start = min([gate.targets[0], gate.controls[0]]) end = max([gate.targets[0], gate.controls[0]]) i = start while i < end: if start + end - i - i == 1 and (end - start + 1) % 2 == 0: # Apply required gate if control, target are adjacent # to each other, provided |control-target| is even. if end == gate.controls[0]: temp.gates.append(Gate(gate.name, targets=[i], controls=[i + 1])) else: temp.gates.append(Gate(gate.name, targets=[i + 1], controls=[i])) elif (start + end - i - i == 2 and (end - start + 1) % 2 == 1): # Apply a swap between i and its adjacent gate, then # the required gate if and then another swap if control # and target have one qubit between them, provided # |control-target| is odd. temp.gates.append(Gate("SWAP", targets=[i, i + 1])) if end == gate.controls[0]: temp.gates.append(Gate(gate.name, targets=[i + 1], controls=[i + 2])) else: temp.gates.append(Gate(gate.name, targets=[i + 2], controls=[i + 1])) temp.gates.append(Gate("SWAP", targets=[i, i + 1])) i += 1 else: # Swap the target/s and/or control with their adjacent # qubit to bring them closer. temp.gates.append(Gate("SWAP", targets=[i, i + 1])) temp.gates.append(Gate("SWAP", targets=[start + end - i - 1, start + end - i])) i += 1 elif gate.name in swap_gates: start = min([gate.targets[0], gate.targets[1]]) end = max([gate.targets[0], gate.targets[1]]) i = start while i < end: if start + end - i - i == 1 and (end - start + 1) % 2 == 0: temp.gates.append(Gate(gate.name, targets=[i, i + 1])) elif ((start + end - i - i) == 2 and (end - start + 1) % 2 == 1): temp.gates.append(Gate("SWAP", targets=[i, i + 1])) temp.gates.append( Gate(gate.name, targets=[i + 1, i + 2])) temp.gates.append(Gate("SWAP", targets=[i, i + 1])) i += 1 else: temp.gates.append(Gate("SWAP", targets=[i, i + 1])) temp.gates.append(Gate("SWAP", targets=[start + end - i - 1, start + end - i])) i += 1 else: raise NotImplementedError( "`adjacent_gates` is not defined for " "gate {}.".format(gate.name)) return temp
[docs] def propagators(self): """ Propagator matrix calculator for N qubits returning the individual steps as unitary matrices operating from left to right. Returns ------- U_list : list Return list of unitary matrices for the qubit circuit. """ self.U_list = [] for gate in self.gates: if gate.name == "RX": self.U_list.append(rx(gate.arg_value, self.N, gate.targets[0])) elif gate.name == "RY": self.U_list.append(ry(gate.arg_value, self.N, gate.targets[0])) elif gate.name == "RZ": self.U_list.append(rz(gate.arg_value, self.N, gate.targets[0])) elif gate.name == "SQRTNOT": self.U_list.append(sqrtnot(self.N, gate.targets[0])) elif gate.name == "SNOT": self.U_list.append(snot(self.N, gate.targets[0])) elif gate.name == "PHASEGATE": self.U_list.append(phasegate(gate.arg_value, self.N, gate.targets[0])) elif gate.name == "CRX": self.U_list.append(controlled_gate(rx(gate.arg_value), N=self.N, control=gate.controls[0], target=gate.targets[0])) elif gate.name == "CRY": self.U_list.append(controlled_gate(ry(gate.arg_value), N=self.N, control=gate.controls[0], target=gate.targets[0])) elif gate.name == "CRZ": self.U_list.append(controlled_gate(rz(gate.arg_value), N=self.N, control=gate.controls[0], target=gate.targets[0])) elif gate.name == "CPHASE": self.U_list.append(cphase(gate.arg_value, self.N, gate.controls[0], gate.targets[0])) elif gate.name == "CNOT": self.U_list.append(cnot(self.N, gate.controls[0], gate.targets[0])) elif gate.name == "CSIGN": self.U_list.append(csign(self.N, gate.controls[0], gate.targets[0])) elif gate.name == "BERKELEY": self.U_list.append(berkeley(self.N, gate.targets)) elif gate.name == "SWAPalpha": self.U_list.append(swapalpha(gate.arg_value, self.N, gate.targets)) elif gate.name == "SWAP": self.U_list.append(swap(self.N, gate.targets)) elif gate.name == "ISWAP": self.U_list.append(iswap(self.N, gate.targets)) elif gate.name == "SQRTSWAP": self.U_list.append(sqrtswap(self.N, gate.targets)) elif gate.name == "SQRTISWAP": self.U_list.append(sqrtiswap(self.N, gate.targets)) elif gate.name == "FREDKIN": self.U_list.append(fredkin(self.N, gate.controls[0], gate.targets)) elif gate.name == "TOFFOLI": self.U_list.append(toffoli(self.N, gate.controls, gate.targets[0])) elif gate.name == "GLOBALPHASE": self.U_list.append(globalphase(gate.arg_value, self.N)) elif gate.name in self.user_gates: if gate.controls is not None: raise ValueError( "A user defined gate {} takes only " "`targets` variable.".format(gate.name)) func = self.user_gates[gate.name] para_num = len(inspect.getfullargspec(func)[0]) if para_num == 0: oper = func() elif para_num == 1: oper = func(gate.arg_value) else: raise ValueError( "gate function takes at most one parameters.") self.U_list.append(expand_oper(oper, self.N, gate.targets)) else: raise NotImplementedError( "{} gate is an unknown gate.".format(gate.name)) return self.U_list
def latex_code(self): rows = [] gates = self.gates for gate in gates: col = [] for n in range(self.N): if gate.targets and n in gate.targets: if len(gate.targets) > 1: if gate.name == "SWAP": col.append(r" \qswap \qwx ") elif ((self.reverse_states and n == max(gate.targets)) or (not self.reverse_states and n == min(gate.targets))): col.append(r" \multigate{%d}{%s} " % (len(gate.targets) - 1, _gate_label(gate.name, gate.arg_label))) else: col.append(r" \ghost{%s} " % (_gate_label(gate.name, gate.arg_label))) elif gate.name == "CNOT": col.append(r" \targ ") elif gate.name == "TOFFOLI": col.append(r" \targ ") else: col.append(r" \gate{%s} " % _gate_label(gate.name, gate.arg_label)) elif gate.controls and n in gate.controls: m = (gate.targets[0] - n) * (-1 if self.reverse_states else 1) col.append(r" \ctrl{%d} " % m) elif (not gate.controls and not gate.targets): # global gate if ((self.reverse_states and n == self.N - 1) or (not self.reverse_states and n == 0)): col.append(r" \multigate{%d}{%s} " % (self.N - 1, _gate_label(gate.name, gate.arg_label))) else: col.append(r" \ghost{%s} " % (_gate_label(gate.name, gate.arg_label))) else: col.append(r" \qw ") col.append(r" \qw ") rows.append(col) input_states = ["\lstick{\ket{" + x + "}}" if x is not None else "" for x in self.input_states] code = "" n_iter = (reversed(range(self.N)) if self.reverse_states else range(self.N)) for n in n_iter: code += r" & %s" % input_states[n] for m in range(len(gates)): code += r" & %s" % rows[m][n] code += r" & \qw \\ " + "\n" return code def _repr_png_(self): return _latex_compile(self.latex_code(), format="png") def _repr_svg_(self): return _latex_compile(self.latex_code(), format="svg") @property def png(self): from IPython.display import Image return Image(self._repr_png_(), embed=True) @property def svg(self): from IPython.display import SVG return SVG(self._repr_svg_()) def qasm(self): code = "# qasm code generated by QuTiP\n\n" for n in range(self.N): code += "\tqubit\tq%d\n" % n code += "\n" for gate in self.gates: code += "\t%s\t" % gate.name qtargets = ["q%d" % t for t in gate.targets] if gate.targets else [] qcontrols = (["q%d" % c for c in gate.controls] if gate.controls else []) code += ",".join(qtargets + qcontrols) code += "\n" return code